Buy 5B1 40106BOS HYDRAULIC GEAR PUMP | Partsdic®
Time： 2024-08-20 17:00:03
Click：
buy-5b1-40106bos-hydraulic-gear-pump-partsdic
Gear Pump Design: The 5B1 40106BOS is a positive displacement gear pump.
It consists of two meshing gears—a driving gear (usually the larger one) and a driven gear. These gears rotate within a closely fitting housing, creating a seal and generating flow by trapping and pushing fluid between the gear teeth. Flow Rate: This hydraulic gear pump model is capable of delivering a specific flow rate, typically measured in gallons per minute (GPM) or liters per minute (LPM). The exact flow rate may vary depending on the specific variant or configuration chosen. Pressure Rating: It is designed to operate under a specific pressure range, often measured in pounds per square inch (PSI) or bars. The 5B1 40106BOS has a particular pressure rating that ensures it can handle the demands of the hydraulic system without experiencing excessive wear or failure.Material Construction: To ensure durability and resistance to wear, hydraulic gear pumps like the 5B1 40106BOS are typically constructed using high-quality materials.
Common materials include cast iron, aluminum, or stainless steel, depending on the application and environmental conditions. Sealing Mechanism: This pump relies on a tight internal seal created by the gear meshing to prevent fluid from leaking out. Proper sealing is essential to maintain efficiency and prevent fluid contamination. Specifications: Model: 5B1 40106BOS Flow Rate Range: [Specify the range of flow rates, e.g., 1-10 GPM] Pressure Range: [Specify the pressure range, e.g., 500-3000 PSI] Material: [Specify the material used, e.g., Cast Iron] Mounting Configuration: [Specify whether it's a flange mount, foot mount, or other] Shaft Type: [Specify the shaft type, e.g., keyed shaft] Shaft Rotation: [Specify whether it's clockwise or counterclockwise] Inlet/Outlet Ports: [Specify the size and type of ports, e.g., NPT or SAE] Temperature Range: [Specify the operating temperature range, e.g., -20°C to 100°C] Fluid Compatibility: [Specify the type of hydraulic fluid recommended]
点击右上角
分享给朋友吧
Long by picture save/share
Follw us
点击右上角
分享给朋友吧
Any references to trademarks, names, descriptions, numbers, and symbols on our website are utilized for reference purposes only. All trademarks pertaining to original equipment manufacturers are duly registered trademarks of the respective original equipment manufacturers. Our website explicitly disclaims any direct association or affiliation with the manufacturers listed. The use of manufacturers' names and descriptions is strictly for reference purposes and does not imply any endorsement or sponsorship.
点击右上角
分享给朋友吧
© 2024 swingmotor.com
