China 5P1 39815PIT HYDRAULIC GEAR PUMP | Partsdic®
Time： 2024-08-20 17:00:07
Click：
china-5p1-39815pit-hydraulic-gear-pump-partsdic
The 5P1 39815PIT hydraulic gear pump is a positive displacement pump that operates on the principle of meshing gears to displace hydraulic fluid.
It typically consists of two gears (an inlet and outlet gear) that rotate in opposite directions within a sealed casing. The precise design and materials used in its construction are chosen to withstand the demands of hydraulic systems, ensuring durability and longevity. Flow Rate: One of the critical specifications of this gear pump is its flow rate. The 5P1 39815PIT is designed to deliver a specific volume of hydraulic fluid per revolution, typically measured in liters per minute (LPM) or gallons per minute (GPM). The flow rate can vary depending on the pump's size and application, but it is a crucial parameter for selecting the right pump for a hydraulic system. Pressure Rating: Hydraulic systems often require pumps that can generate high pressure to operate effectively. The 5P1 39815PIT is rated for a specific maximum pressure, which is the maximum amount of pressure it can generate within the hydraulic system. Pressure is typically measured in pounds per square inch (PSI) or bars, and this specification is crucial to ensure the pump can meet the system's requirements.Mounting Configuration: The 5P1 39815PIT hydraulic gear pump is available in various mounting configurations to accommodate different installation needs.
Common mounting options include flange, foot, and bracket mounts. Choosing the right mounting configuration is essential to ensure proper integration into the hydraulic system. Shaft Configuration: The pump's shaft configuration is another important aspect. It determines how the pump connects to the power source, such as an electric motor or an engine. Common shaft configurations include spline, keyed, and threaded options. Proper compatibility with the drive source is crucial to ensure efficient power transmission. Sealing and Leakage: Hydraulic gear pumps need to maintain a tight seal to prevent fluid leakage, which can lead to system inefficiency and damage. The 5P1 39815PIT typically incorporates high-quality seals and gaskets to minimize leakage and ensure a reliable performance. Material Selection: The choice of materials for the pump's gears, housing, and other components is vital to its overall performance and longevity. Materials are often selected based on factors such as fluid compatibility, wear resistance, and corrosion resistance. Common materials used include steel, cast iron, and various alloys.
点击右上角
分享给朋友吧
Long by picture save/share
Follw us
点击右上角
分享给朋友吧
Any references to trademarks, names, descriptions, numbers, and symbols on our website are utilized for reference purposes only. All trademarks pertaining to original equipment manufacturers are duly registered trademarks of the respective original equipment manufacturers. Our website explicitly disclaims any direct association or affiliation with the manufacturers listed. The use of manufacturers' names and descriptions is strictly for reference purposes and does not imply any endorsement or sponsorship.
点击右上角
分享给朋友吧
© 2024 swingmotor.com
